Adam Equipment A7 Manuale Utente

Adam Equipment CBD SERIES (P.N. 6242, Revision A7, June 2007) Software revision: 1.4-1.16 © Adam Equipment Company 2007

This key is used to select the local or remote scale. [Tare/Zero] This key has a combined Zero and Tare function. If the net weight is below ±2%

© Adam Equipment Company 2007 5.2 UNIT WEIGHT WINDOW • This display will show the unit weight of a sample. This value is either entered by the u

6.0 OPERATION • The basic weighing functions are same for both the scales- local and remote. However the number of weighing divisions may be less

© Adam Equipment Company 2007 6.1 ZEROING AND TARING THE DISPLAY The Tare and Zero function are combined into one key. When the gross weight is w

© Adam Equipment Company 2007 • When the container is removed a negative value will be shown. If the scale was tared just before removing the cont

© Adam Equipment Company 2007 6.2 MEMORY FUNCTIONS The [M+] key will add the results of a weighing into memory, regardless of whether the local or

© Adam Equipment Company 2007 6.3 PARTS COUNTING The basic function of parts counting is same for both the scales. In order to do parts counting it

© Adam Equipment Company 2007 6.3.2 Entering a known Unit Weight • If the unit weight is already known then it can be entered using the keypad.

© Adam Equipment Company 2007 6.3.4 Count pre-set or check-weighing Check-weighing (or Count Pre-setting) is a procedure to cause an alarm to sound

© Adam Equipment Company 2007 6.4 PLU (Product Look Up) Product Look-Up (PLU) numbers are used to store information about the commonly used items

© Adam Equipment Company 2007 CONTENTS 1.0 INTRODUCTION...

© Adam Equipment Company 2007 Please find below an example for setting up “PLU 27” with Description as “M4 Nut” and Unit weight of “0.015”. DISPLA

6.4.2 ENTERING DESCRIPTION MANUALLY The description can be up to 12 characters long and can be a mix of numbers, symbols or letters. During the pr

6.4.3 RECALLING PLU’S MANUALLY • To recall the PLU values the user should first select either local or remote scale as the tare value stored will be

the tare weight depending on the scale resolution (For example, in this case, -1.45 would be used as the tare value). • If a PLU number is recalled

© Adam Equipment Company 2007 “"oFF"” Backlight is set to off “LitE"” “LitE"” "on"”

© Adam Equipment Company 2007 U id “U id” “ Abc234” “ “ Shows the current user ID (if any). Enter a new User ID as described in th

9.0 RS-232 OUTPUT Specifications: RS-232 output of weighing, data default settings ASCII code 4800 Baud (600-9600 selectable) 8 data bits (8 data

© Adam Equipment Company 2007 9.1 INPUT COMMANDS FORMAT The scale can be controlled with the following commands. Input Commands: • The scale h

© Adam Equipment Company 2007 9.2 STORING DATA VIA RS232 To store data the commands are: SUIDxxxxxx <CR> Store user ID data SSIDxxxxxx <

© Adam Equipment Company 2007 10.0 CALIBRATION ACTION DISPLAYS Press the [Tare/Zero] key during the self-test at power on. The scale will ask to

1.0 INTRODUCTION • The CBD series offers a range of an accurate, fast and versatile counting scales that can use one additional external platform

© Adam Equipment Company 2007 11.0 ERROR CODES During the initial power-on testing or during the operation, the scale may show an error message.

© Adam Equipment Company 2007 12.0 TECHNICAL PARAMETERS The technical parameters accessed via the “tEch” prompt at the end of user parameters and

© Adam Equipment Company 2007 Press the [U.Wt/Unit] to go to next menu. Press [Print] to enter. Use [U.Wt/Unit] to select the decimal point positio

13.0 REPLACEMENT PARTS AND ACCESSORIES If you need to order any spare parts and accessories, contact your supplier or Adam Equipment. A partial list

© Adam Equipment Company 2007 WARRANTY INFORMATION Adam Equipment offers Limited Warranty (Parts and Labour) for the components failed due t

Manufacturer’s Declaration of Conformity This product has been manufactured in accordance with the harmonised European standards, following

ADAM EQUIPMENT is an ISO 9001:2000 certified global organisation with more than 30 years experience in the production and sale of electronic weighing

© Adam Equipment Company 2007 2.0 TECHNICAL SPECIFICATIONS 2.1 SPECIFICATIONS FOR THE LOCAL SCALE Model # CBD 3 CBD 6 CBD 15 CBD 30 Maximum

© Adam Equipment Company 2007 2.3 COMMON SPECIFICATIONS Interface Bi-directional RS-232 Interface Stabilisation Time 2 Seconds Operating Tempe

3.0 INSTALLATION 3.1 LOCATING THE SCALES • The scales should not be placed in a location that will reduce the accuracy. • Avoid extr

the level and the scale is supported by all four feet. • Attach the power supply cable to the connector on the right side of the scale base. Plug

© Adam Equipment Company 2007 REMOTE SCALE CONNECTION The cable for the load cell goes to a 9 pin D-subminiature plug connector with the following

4.0 KEY DESCRIPTIONS [0-9, •] These keys are used to manually enter a value for tare weights, unit weight and sample size. A secondary function